Dream It | Live It | Love It

AGT™ SoCal Contractors & Architects

AGT™ can be used as a unique design element AND a functioning, self-powered renewable light source for ANY type of application the utilizes cement, concrete, terrazzo, epoxy or stucco. 

​AGT is versatile, as it can be used indoors or outdoors with little to no performance variation. Clients are using AGT™ in a range of projects which may include Commercial and Residential:

Foyers and Halls
Marble and Recycled Glass Terrazzo
Stucco and Plaster
​Honed Concrete
Stamped Concrete
Epoxy Floors
Bathroom Vanities
Kitchen Countertops and Islands
Garage Floors
Hotel Lobbies
Emergency Egresses
Shopping Malls
Subway Platforms
Theatre Floors
Bar Tops
Barbecue Tops
Pools / Coping
Exposed Aggregate Hardscaping
Support Walls
Stepping Stones
Pathway Boarders
Parking Lots
Highway Markers
Hotel Entrances
​And more...

Material Profile:

AGT™ is non-toxic and safe for use in all types of environments.

Outstanding Luminosity
Exposure to 40 seconds of direct sunlight produces an afterglow of over 20 hrs. Exposure to Daylight for 10 min. produces an afterglow of over 20 hrs. Exposure to artifical light such as Halogen, Florescent etc. for approx. 10-30 minutes produces an afterglow of over 20 hrs.


The luminosity of the AGT™ line of aggregates is dependent on actual particle size and can reach an initial intensity burst of 3612 mcd/m2 @ 1min. and then begin degrading once removed from light source.

Stability of Physical And Chemical Properties
AGT™ works perfectly between +500ºC and -20º C. It is also resistant to high and/or extended exposure to ultraviolet radiation and does not discolor under 300-watt high mercury lamp for 1000 hours at 35ºC - 40ºC, 80% humidity. AGT™ is unaffected by most chemicals and performs exceptionally even in the worst outdoor conditions.

Fine Particles
​The AGT™ line of aggregates range in particle size and are available in NSTM Sizing of:100mesh glow sand to #2 Glow Stones.